How to Root Tecno W3 and Flash TWRP Recovery (Step by Step)

In this post, we will demonstrate to you industry standards to streak TWRP Recovery on Tecno W3.TWRP Recovery enables you to streak custom ROM and portion on your smartphone.TWRP Recovery is additionally valuable to take a total reinforcement of your smartphone.This control likewise demonstrates to you proper methodologies to root Tecno W3 with the assistance of TWRP Recovery.

Tecno W3 is a passage level Android cell phone with Android Marshmallow working system.This cell phone has 5 inches 480p show with 196ppi density.Under the hood, Tecno W3 has 1.3 GHz quad-center chipset with 1 Gb of RAM and 8 GB of interior storage.Other specs incorporate 5 MP back camera, 2 MP front camera and 2500 mAh removable battery.

This guide will utilize SP Flash Tool to streak TWRP Recovery on your Tecno W3 smartphone.You require a PC to streak TWRP Recovery on your smartphone.Then with the assistance of TWRP Recovery, we will streak SuperSu root record on Tecno W3 and pick up root access.You can likewise utilize Magisk device to root Tecno W3.So take after the beneath manual for root Tecno W3 and blaze TWRP Recovery.

WARNING – Flashing Custom Recovery and establishing may block your device.We are not dependable if your gadget gets harmed amid the glimmering procedure.Make beyond any doubt your gadget has no less than 50-60 percent battery reinforcement.

Downloads:

1. SP Flash Tool

2. TWRPW3.rar

3. SuperSu.zip

How to Flash TWRP Recovery on Tecno W3

1.Install MediaTek VCOM drivers on your computer.

2.Unlock the bootloader of your Tecno device using ADB and Fastboot commands.

3.Enable Developer options by going to Settings>>About and tap on build number 7 times.

4.Enable USB Debugging by going to Settings>>Developer options and tick USB Debugging and OEM Unlock.

5.Move SuperSu.zip file into internal storage of your smartphone.

6.Power off your smartphone and install SP Flash Tool on your computer.

7.Double click on the flash_tool file to open SP Flash Tool.

8.Unrar the recovery file and get recovery.img file.

9.Click on Download menu button in SP Flash Tool.

10.Click on Scatter-loading button and select the recovery.img file.

11.Click on Download button to begin the flashing process.

12.Connect your smartphone to your computer using a data cable and keep pressing Volume up and Volume down key together until your smartphone boot into download mode.

13.Boot into TWRP Recovery by pressing and holding Volume up and Power button together.

Take after the beneath manual for root your Tecno W3

How to Root Tecno W3 smartphone

1.Once you are into TWRP Recovery, tap on install button.

2.Select the SuperSU.zip file from the internal storage of your smartphone.

3.Swipe to flash the root file on your smartphone.

4.Reboot your smartphone normally once the flashing process completes.

That is it your Tecno W3 is established and running TWRP Recovery.

Search This Blog

How to Root Tecno W3 and Flash TWRP Recovery (Step by Step)

Ditulis pada: Juli 30, 2018